|
|
||
|
|
||
|
Main
| About
| Features
| Options
| Technical Info
| Contact
|
 |
 |
|
|
|
(Pneumatic Tanker Configuration) |
|
|
||||||||||||||||||||||||
|
LOADING/UNLOADING |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||
|
Our patented VSM (volume space modulator) system is activated in the final unloading phase to ensure complete emptying of the space between the hopper outlet ports. This means you will never have to worry about valuable bulk being caught inside the tank, everything that goes into the tank will come out again, no problem. |
|
||||||||||
|
|
ALUMINUM HOPPER
Our units are equipped with a full length aluminum hopper which puts a good part of the load between the two main beams. This provides a low center of gravity and improved handling capabilities. |
|---|---|
| THE ROOF
When in bulk mode, the floor of the flatbed (which has built in manhole covers), serves as the roof of the tanker. |
|
|---|
|
|
HYDRAULIC POWER
A built-in engine at the rear compartment of the unit provides the hydraulic power required to convert the unit from bulk mode to flatbed mode (or vice versa). |
|---|
| Main | About | Features | Options | Technical Info | Contact |
| Quick Links |
| C.T.S. Home | Rolling Tarp | Liquitain-R | Rollcov-R | Special Projects |
